Automotive
Digitalisation and Automation of Continental Automotive Plants
Holistic approach to digitalisation. You either digitalise or you don’t, there’s no doing it halfway. This should be THE approach to digitalisation, according to Tomáš Vondrák, Managing Director of Continental Automotive Czech Republic, who spoke at the Trends in Automotive Logistics Conference (TAL) on September 21st in Pilsen. We summed up Tomáš’s most inspiring points in this article.
Ivan Marinec: The role of data in the digitalisation of automotive logistics
The typical causes for automation failures all usually share the same roots. These are: low-quality data, poor knowledge of the system’s possibilities and a lack of courage. How can you make the most of the new prospects brought by digitalisation while maintaining logical and sensible goals?
Driving trucks from home, and UX as an engine for digitalisation: The most interesting quotes of TAL 2021
Seeking the right balance for automotive logistics – that was the main theme for this year’s Trends in Automotive Logistics conference, held in Pilsen on 21 September 2021. A total of fourteen speakers from throughout Europe came to share verified tips and experience gained from digitalisation projects. How do automotive logistics experts see the future? We’ve chosen the most inspiring statements from this year’s conference just for you.
The TAL 2021 Conference: Logistics Digitalisation Must Come with Balance
Fourteen speakers from throughout Europe assembled in Pilsen on 21 September for the Trends in Automotive Logistics (TAL) conference, organised by Aimtec in cooperation with IHK Regensburg and DTIHK. The automotive logistics experts appearing on the conference stage included Marco Prüglmeier from i2market and Michael Schneider from idealworks. The topic of establishing the right balance regarding logistics digitalisation accompanied the entire programme. And the conclusion? Constant balancing, the seeking of new paths and evaluation of individual solutions’ pros and cons is, the speakers say, what is most likely to guarantee success for both small projects and cross-company transformations. TAL 2021’s participants found confirmations of this in the majority of the conference presentations.
Automotive should learn from e‑commerce. Through data and digitalisation.
If you want to succeed, learn from the best. That is why we’ve interviewed Ivan Marinec, with his rich portfolio of experience from operations and logistics management in automotive. Over 20 years in this field have given him a unique perspective on the current turbulent situation and more importantly on the trend of digitalisation in automotive manufacturing. We asked him for tips as well as lessons learned that have helped him to start his own company.
Automotive for a New Age: Localised Manufacturing and Supply Chains Alongside New Business Models
For over a year now, the global economy has seen a trial by fire, and it is struggling with the impacts of anti-epidemic measures. In automotive, the pandemic has mercilessly revealed the vulnerability of global manufacturing and supply structures, and meanwhile this sector is seeing the greatest change in a century, with combustion engines gradually giving way to electric.
TAL 2021: The topic for automotive logistics in 2021 will be finding a balance
Audi, BMW Group, ŠKODA AUTO, ZF Friedrichshafen, Volkswagen, Eissmann Group Automotive – návštěvníci konference Trends in Automotive Logistics (TAL) už měli v minulosti možnost vyslechnout si zkušenosti, případové studie a inspiraci od těchto velkých hráčů v automotive a také od desítek jiných. Loni v únoru přilákal jubilejní 20. ročník do Plzně téměř 300 českých i zahraničních účastníků, kteří podle zpětné vazby odjížděli spokojeni. I v letošním roce chystáme inspiraci v podobě toho nejlepšího z logistiky v automotive. Posun na podzimní datum 21. 9. 2021 vidíme jako příležitost setkat se v Plzni znovu osobně a navázat tak na úspěšné předchozí ročníky. O tom, na co se letos můžete těšit, jsme si povídali s Romanem Žákem, předsedou představenstva Aimtecu.
Local automotive manufacturing? Smart microfactories will make it possible.
Traditional production lines may soon be replaced by innovative microfactories consisting of manufacturing cells with flexible robotic stations. These can make do with a floor area that’s two orders of magnitude smaller and can be brought into operation considerably faster.
Expensive electromobility may endanger Europe’s OEMs
Even ten years from now, European OEMs will still spend more to produce each electric vehicle than they would for a compact automobile with an internal combustion engine. Pressure on companies’ profitability will continue to grow, and in time it can lead them to merge into larger units – and to share R&D costs as well. Will Europe’s automotive leaders fall into the red?
Asprova Opened Our Eyes. Thanks to It We Were Able to Reduce Our Stock by 50%
The Futaba Czech company started an implementation of the Asprova system for advanced planning and production controlling in April 2014. It has been fully relying on this APS system since the beginning of 2015.
How Does the EDI Communication in the Fiat Chrysler Automobiles Car Plant Look Like?
The seventh largest carmaker in the world, FCA – Fiat Chrysler Automobiles in the USA, supports the process of electronic communication with suppliers using so called feedback messages.
The TAL Conference Has Attracted Well‑Known Experts
The Trends in Automotive Logistics conference (TAL) took place on June 9th, 2016. This annual and eagerly awaited action took place in an interesting and attractive environment again – the 28th floor of the Prague highest building, in Pankrác.
František Finger, TRCZ: We Implemented WMS Mainly for Traceability
The TRCZ company is a daughter company of the Tokai Rika company, Japan. The company manufactures automotive parts, safety elements, and keys for cars. In the Czech plant in Lovosice, the company has implemented, step by step, a complex solution for the management of material flow, from call-offs to shipment, in cooperation with the Aimtec company.
The Specifics of Delivering for Jaguar Land Rover (JLR)
A new JLR plant is being constructed in Slovakia. This is one of the largest foreign investments in Slovakia’s modern history.
How Does a Car Get Painted aka APS in Paint Shops
You come into the showroom, the salesman hands over the keys and you step up to your new car for the first time.
